Application
Here’s How To Test and Screen Multistage Arrestors – Check Out The New Technical Note!
Although this new Technical Note covering how to test/screen an arrestor to ensure that it is working and operating properly was specifically created in reference to our FPL series of units designed to protect GPS and other Global Navigation equipment…the input here also applies to the majority of the NexTek FPL and FPN series units. Most of…
Read MoreFeatured Threat Type – Lightning Protection for Radio and Communication Lines
Although probably our best-known type of solution, we wanted to take the opportunity to start off 2017 by highlighting Lightning Protection for coaxial RF applications. Fundamentally, the purpose of these devices is to provide high-performance Lightning & Surge Protection for Radio and Electronic Systems and their Users. This can be as simple as protecting a radio itself, or as…
Read MoreDid You Know? – NexTek EMI Filters Are Used In Medical Equipment to Prevent Unwanted Electrical Interference
Where Are These Filters Used? High Current EMI Filters are commonly used on high power feed lines within MRI Machines and high-power Medical Lasers, in order to prevent any electronic interference issues and provide full Electromagnetic Compliance to common Medical Equipment regulations. EMI Filters can be required on the Noise Source or the potential Noise Victim,…
Read MoreDid You Know? – NexTek Arrestors are used on Military Vehicles and Systems around the world!
You Might Not Know; Just as our line of Power Filters are used to provide EMC compliance for a wide variety of military and government applications, our line of Surge Arrestors for coaxial RF lines are also in-use on an wide range of systems worldwide! Whether they are installed on a Permanent Installation or a Land…
Read MoreDid You Know? – NexTek Filters Enable EMI Compliance for Fixed, Mobile, and Airborne Radar Systems
Today’s Featured Application and Did You Know? topic covers NexTek HPR series power filters and the fact that they are used in radar power supply systems around the world. We have EMI filters installed in fixed ground, land and sea mobile, and also airborne radar systems to help enable compliance with applicable EMI and RFI…
Read MoreDid You Know? – NexTek Enables Compliance with DO-160G Avionics and Aircraft Equipment Standards
The DO-160 Series (currently DO-160G) regulations regarding Avionics cover a wide range of test requirements that every piece of certified Avionics equipment must comply with. With the range of requirements covered under this wide-reaching document, covering everything from Temperature Range and Vibration Ratings to EMI Susceptibility and Lightning Protection. Learn more about DO-160 and it’s…
Read MoreDid You Know?: NexTek Feedthrough Filters Enable Laser System EMC Compliance
Are you developing a Laser System for Industrial, Medical, or other Commercial use? Is your system prepared for regulatory compliance testing, specifically EMC testing for Emissions and Susceptibility? Have you identified a filter solution that is rated for enough current but also compact enough to fit almost anywhere? You don’t have to look any further…. For…
Read MoreLightning Arrestor Enables GPS Systems to Run Without Downtime! – FPL Series Highlight
Our FPL Series of GPS Lightning Arrestors have been providing security and confidence to users of GPS Positioning and Timing Synchronization Systems around the world for over 10 years! These multi-stage protectors provide the fastest-acting surge protection available for DC Pass GPS and Global Navigation Band applications operating between 1.15 and 1.61 GHz. The special…
Read MoreProtecting Radio Equipment from HEMP/NEMP High Speed Transients – Coaxial Arrestor Threat Type Spotlight
This post is about protecting against high speed HEMP/NEMP pulses, one of the many types of transient threat that NexTek arrestors provide protection against. Although Lightning energy is the primary source of damage to coaxial lines and systems where they are used, there are also other types of Surge Energy that can cause damage to electronics.…
Read MoreGuidelines for Installing Lightning Protection within Hazardous Environments – NexTek White Paper
Have you ever wondered if it was possible to install lightning and surge protection within or nearby to a Hazardous Environment? If so, what sort of factors are important to be aware of during system design and maintenance? Are you familiar with NEC, NFPA, or ANSI Explosive Atmosphere Ratings but unsure about how to apply…
Read More