Have you been wondering how to select the correct surge protection for your Coaxial RF application? This newly-released Selection Guide is a handy tool which will help walk you through the selection process and end up with the best standard solution for your needs.
This include a review of our major product lines, a list of primary selection criteria that are important to know before making a decision, and some additional charts and information to help simplify the process.
Click through below to find the new RF Arrestor Selection Guide and start the process!
As with most technologies, RF and Wireless system design is an ever-changing and shifting world. As certain technologies or RF bands become popular, others fade away.
However, the one ever-present force on the industry is the steady, but relentless, push towards smaller size and better integration over time.
Lightning/Surge Protection at the PCB Level?
Here at NexTek we understand the desire to bring things into the box, or even all the way onto the Radio PCB… However, we also know that Lightning Transients contain too much energy to deal with safely at the PCB Level… Trace widths, ground place areas, and the components themselves all become limiting factors that will prevent complete and effective protection.
Given this reality, the last place where it is reasonable and safe to protect against Lightning or other Surge events is at the radio’s box or chassis level. By replacing the normal I/O connector with a protected version, designer can ensure that they have high-performance protection without paying any significant size or weight penalty. As long as the radio’s chassis is grounded well, the bulk of the Transient Energy will be drained safely to ground before entering the box and/or the PCB itself.
It may still be advisable to install some simple protection on the PCB, but only for final clean-up…Something like a small Protection Diode coupled with a DC Blocking Capacitor (if possible for your application) would provide plenty of protection against any residual energy that gets past the Protected I/O Connector.
Maximum Protection in the Minimum Amount of Space
Below, you can see an array of our Ultra-Compact protection options… They all include high-performance lightning protection, and are available in a wide variety of connector configurations on both the Input and Output side.
Outside Connector Options – Type N, TNC, SMA
Inside Connector Options – SMA, MMCX, RG188, RG316, and more!
We are happy to announce the recent release of a brand-new two-page bulletin and brochure, featuring our range of compact high-performance arrestors. Whether you are working on a new design, or trying to retrofit something onto an existing one…these ultra-small options are ideal for any application where size is a critical design factor.
Instead of trying to add some (likely inadequate) transient protection on-board, or having to go all the way to a traditional external arrestor mounted somewhere on the cable run…It is now possible to integrate world-class protection against Lightning, Static (ESD) or High-Speed EMP into a bulkhead connector that will easily replace most existing I/O feedthrus!
With the wide array of connector options and frequency ranges available, you should be able to find a solution for any application. Learn more and download the new Product Bulletin by following the jump below;