Technical Sales Coverage for Australia and New Zealand – Announcement

We are happy to announce a brand-new international partner, providing Technical Sales and Support coverage for Australia and New Zealand! ASD Technology, based in Sydney and found here online: http://www.asdtech.com.au/, is an excellent Manufacturers’ Representative and we are excited to be the latest addition to the ASD Line Card!

We look forward to being able to provide unrivaled support and service in Australia and New Zealand with the help of our new partners!


Learn more about ASD on their website HERE
Learn more and click through to a directory of all of NexTek’s International Agents, including ASD Technology now covering Australia and New Zealand.


Did You Know NexTek Is Fully ITAR Registered and Compliant?

Here at NexTek we have been ITAR-registered with the Department of State and their Directorate of Defense Trade Controls [DDTC] for well over 15 years. This means that we are fully compliant with Export Regulations and able to apply for licenses to export information or products as warranted.

We are proud to employ a dynamic team of U.S. Citizens, and we take security seriously for every project and solution we get involved with. Starting as an EMC consultation company over 30 years ago, our company and team of experts have been providing Surge Protection and EMI/RFI solutions into the Military and Government space from the very beginning.

Whether or not you need something special or that might be ITAR restricted, you should be able to feel confident that we have the experience, expertise, and knowledge to deal with any set of requirements that might come along.


Learn More About NexTek Regulatory Compliance



Lionheart Northwest Joins the NexTek Sales Team – New Rep Coverage for the Pacific Northwest!

Once again, we are excited to be able to announce a new local sales representation partnership…  This time providing full technical sales coverage in the Pacific Northwest states of Washington, Oregon, and Idaho.

Learn more about Lionheart by visiting their website here (click the logo below!)

And to learn more and see our entire list of U.S. partners including a map of coverage, visit our Domestic Reps and Distributors page.

 



Coming Soon To Our Lineup… A High Current Pi-Filter (C-L-C) for Maximum EMI Suppression

We have been designing and building feedthrough EMI Filters for high current (30Amps and above) AC and DC applications for nearly 30 years now. There have been multiple design iterations and some important innovations over this time period, but our filter products have been limited to C-Type filters only.
However, this is all about to change! Coming soon, we have a brand-new Pi Filter design for high-current applications. C-L-C Circuit Design means a sharper Insertion Loss curve once the filter turns on, and higher maximum filtering figures approaching 100dB of Loss.


A Small Preview of Design Features:

  • C-L-C aka Pi Filter Configuration
  • Extremely Compact Package for 180Amperes of Thru-Current
  • Available in a Wide Range of AC and DC Voltage Ratings
  • Optional Transient Suppression Available


Expect to learn more over the coming months as Datasheets, Product Pages, and more information will be available soon!


Two New Manufacturer’s Representative Partnerships Provide Coverage To Upper Midwest and Mountain States!

Yet again, we are extremely proud to be able to announce two new partnerships with leading-edge Manufacturer’s Representation firms!

blackhart-logo

Blackhart, LLC provides technical sales support and coverage to the states  of Colorado, Utah, Wyoming, and Montana.

logo3

KJS Marketing provides technical sales support and coverage to the states of Ohio, Illinois, Michigan, Indiana, Wisconsin, Minnesota, Iowa, Missouri, Kansas, Nebraska, and North and South Dakota.

As with our other partners, both firms represent an array of manufacturers across the Microwave/RF and EMI spectrum and provide first-class technical, engineering, and product-selection support.  Whether you are a current customer, or a potential user just being introduced to our range of solutions…  it is definitely worthwhile to take a look at our coverage map, because you probably have a NexTek-trained partner and expert in your local area!


Learn More:

Regional Representatives and Distributors – Coverage Map and Contact Information



Did You Know? – NexTek EMI Filters Are Used In Medical Equipment to Prevent Unwanted Electrical Interference

Where Are These Filters Used?

High Current EMI Filters are commonly used on high power feed lines within MRI Machines and high-power Medical Lasers, in order to prevent any electronic interference issues and provide full Electromagnetic Compliance to common Medical Equipment regulations.EMI Diagram - CC0

EMI Filters can be required on the Noise Source or the potential Noise Victim, and sometimes are installed on a certain line for both reasons!  A filter installed on a properly shielded barrier will provide fully bi-directional protection.

What Types Of Medical Equipment?

In terms of devices that are likely to have a high-current connection and EMC requirements…MRI Machines and Medical Lasers are the most common types that might require a high current filter.

MRI - CC0

What Makes These EMI Filters Effective For the Application?

Our HPR Series filters are the Most Compact units available for their current ratings, and combined with Excellent Filtering Performance and an especially Rugged Design they are ideally suited for any high-current DC or AC filtering application.   Medical equipment is subject to some of the most stringent EMC requirements of any industry, mostly because in most medical facilities there is a lot of equipment operating in close proximity with each other.  Combine the crowded environment with the fact that people’s lives may be on the line when this equipment is being used, and you have the perfect explanation for the tough EMC requirements.

Heart Rate Monitor - CC0


Learn More

Medical Devices – Industry Page

HPR Series EMI Filters – Product Page



Expanding Our Coverage – NexTek Announces New Partnership with S&S Technology Covering Southern California and Southern Nevada

Once again, we are proud to share the news that NexTek has formed a brand-new partnership agreement with a leading-edge RF Component Sales Team, S&S Technology, Inc out of Southern California.  As we continue to expand our Representation Network to cover the map, we are excited to be able to provide the highest level of local support for all of our customers.

If you are located in Southern California or Southern Nevada and you are a current customer, considering using our products, or just someone curious to know more about the solutions that we provide… Please get in touch with S&S Technology or NexTek directly for an introduction to the team!


Domestic Reps and Distrubutors Page – Including Coverage Map


sstrf-logo

S&S Technology, Inc. 



Did You Know? – NexTek Filters Enable EMI Compliance for Fixed, Mobile, and Airborne Radar Systems

Today’s Featured Application and Did You Know? topic covers NexTek HPR series power filters and the fact that they are used in radar power supply systems around the world.  We have EMI filters installed in fixed ground, land and sea mobile, and also airborne radar systems to help enable compliance with applicable EMI and RFI requirements at the system-level.

See below for an example of a ground mobile radar system where HPR series filters could be used, usually mounted within the Power Supply sub-system.

Radar-CC0


Unique Features that make HPR Series Feedthrough Power Filters ideally suited to these applications;
  • Robust and Rugged Design – High Performance in any Environment
  • Compact Size and Form Factor – Save the Maximum Amount of Space and Weight
  • Filtering Performance to 1GHz+ – Exceptional High Frequency Filtering Performance
  • High Reliability Units Available – Burnt-In Units for Maximum Reliability

No matter what type of radar system is being designed, NexTek HPR Series EMI and RFI filter solutions for power lines are uniquely suited for the challenge!

Learn more about HPR Filters.

Learn more about What We Do here at NexTek


See the gallery below:

 


Our Sales Team Continues To Expand! – Spartech South Announced as NexTek’s Sales Representation for the Southeast US

We are extremely proud to announce that NexTek has formed another new partnership for 2016, a Sales Representation agreement with Spartech South to cover the Southeastern states ranging from North Carolina all the way to Mississippi and including Florida and Tennessee as well!

Spartech South will cover Region 3, shown on the updated map below in Yellow.

US_states_and_territories_ - NT Reps MapIf you would like to know more about NexTek or our solutions for Lightning and Surge Protection of Coaxial/RF lines or High Current Feedthrough EMI filtering, please feel free to contact your local/regional Representative directly, or simply get in touch with us directly and we will guide you to the correct local contacts!

Once again, we are proud to announce that Spartech South has joined our team… We look forward to helping them serve the area that sees the most Lightning Strikes and Thunderstorms out of anywhere in the United States!


Click through to Spartech South’s website:

Spartech South Logo

 

Visit our Domestic Reps and Distributors page for more information:

Rep and Disty Graphic